31
2024
-
10
How to replace the Tiida wiper strip
First, you need to lift the wiper arm, and then press and hold the clip on the wiper, so that the wiper can be removed. Then, use needle-nose pliers to gently check out the wiper strip with the metal card and remove the old wiper strip. Then, install a new wiper strip, and then restore the wiper can be installed.
First, you need to lift the wiper arm, and then press and hold the clip on the wiper, so that the wiper can be removed. Then, use needle-nose pliers to gently check out the wiper strip with the metal card and remove the old wiper strip. Then, install a new wiper strip, and then restore the wiper can be installed.
It should be noted that Li Da is a model owned by Dongfeng Nissan, with a body size of 4250*1695*1535mm and a wheelbase of 2700mm. Its top speed can reach 190 km/h, maximum power is 80 kW, and maximum torque is 153 N · m. Its wiper is made of Valeo U-shaped interface metal skeleton, and the adhesive strip is a universal boneless wiper strip.
Before removing the wiper, you first need to energize the whole car, but do not start the car. Then press the power-on button twice, and then turn off the power. At this time, press the glass water cleaning switch of the front windshield within 15 seconds, the wiper will rise to the half position and stop, and it can be disassembled at this time.
After replacing the new wiper strip, power on the whole car again, and then push the wiper to the single wiper position, the wiper will return to its original position, which means that you have successfully completed the replacement of the wiper strip.
More information
2024-10-31
2024-10-31
2024-10-31
2024-10-31
Add
No.15, Standard Factory C, Jiu Long Garden Avenue, Jiu Long Po District, Chong Qing City
Copyright Chongqing Cabella Electromechanical Co.,Ltd All Rights Reserved.
Website：300.cn jinzhou.300.cn | SEO | Privacy Policy